The SNR.19.01 self-service bike repair station is a device that allows for the repair or minor servicing of a bicycle during a trip. 1 The hanger allows the bicycle to be suspended by the saddle, enabling wheel removal and easier access to the drivetrain components of your bike.
The station is mounted to the ground using 4 mounting screws, similar to the pump and its housing. The construction of the Inoplex bike repair station is made of galvanized steel and powder-coated in any RAL color. This allows for color matching the station to the facility where it is located.
Upon request, it is possible to manufacture the repair station structure from stainless steel.
The Inoplex bike repair station can be installed alongside ST.19.04 and ST.19.05 bike racks.
The Inoplex bike repair station includes:
Pump with manometer
Phillips screwdriver
Flat-head screwdriver
Torx screwdriver
10” adjustable wrench
14 mm open-end wrench
8 x 10 mm open-end wrench
10 x 13 mm open-end wrench
T-type Allen key 3.0 mm
T-type Allen key 4.0 mm
T-type Allen key 5.0 mm
T-type Allen key 6.0 mm
T-type Allen key 7.0 mm
T-type Allen key 8.0 mm
The equipment composition may include various combinations of the indicated tools or a slightly modified range depending on the needs.
*The visualizations show an indicative image of the product.
Do you need a custom product?
Each of our products can be customized to the appropriate dimension by changing its height, width or length according to individual requirements. If our offer does not include products that meet individual requirements, our designers will design a new product from scratch based on your comments.